 |
|
| Actuator type turbo kits which offer power levels which are normally only achievable through external wastegate systems. Ideal for those who want big power with easy installation. |
|
 |
| Maximum power from actuator class turbo |
| With a newly designed large volume swing valve, HKS is dispelling the myth that high power turbo applications require the use of an external wastegate and have achieved the necessary capacity whilst maintaining stable boost levels. High power at low cost is now achievable through the use of the standard manifold. |
| Easy "Bolt On" Fitment |
| Kit layout follows that of the standard turbo and so items like intercoolers which may already be installed on the car, which are designed for the standard turbo, can still be used with these kits. The kit contains extension pipe, oil hoses, water lines and gaskets making it possible to bolt the kit to a standard car with no other necessary parts (Fuel and ignition control will be necessary to maintain ideal running conditions.) |
| Wide Range of Use |
| Ideal for use with a wide range of tuning from stock engines to those which have had upgraded internals and cams. |
| |
| Kit Contense |
- GT-Pro series Turbo RB26 kits contain GT-Pro S turbos
- Uprated Actutor
- F-CON mini Not in all kits)
- Extension Pipe
- (Suction Pipe)
- Oil and Water Lines
- Gaskets
- Other Short Parts for Fitting
|
|
| GT- 2835 PRO |
| TURBO SPECIFICATION |
| Model |
Included Control Device |
Rated Power for 1 Unit (PS) |
| GT2835Pro |
HKS Upraed Actuator |
420 |
| Compressor Wheel |
| Trim |
Inlet Diameter (mm) |
Outer Diameter (mm) |
| 56 |
53.1 |
71.1 |
| Compressor Housing |
| Trim |
Inlet Diameter (mm) |
Outer Diameter (mm) |
| Specific |
Specific |
0.50 |
| Turbine Wheel |
| Trim |
Outer Diameter(mm) |
Outlet Diameter(mm) |
| 84 |
56.5 |
51.8 |
| Exhaust Housing |
| Inlet Flange |
Outlet Flange |
A/R |
| 1JZ(VVT-i) |
GT-Pro Specific |
0.68 |
|
|
| Specification of tested model |
| Cam |
Intake |
Exhaust |
Intercooler |
Fuel Control |
Other |
| IN:256°
EX:256° |
- |
HKS |
GT-TYPE |
F-con mini |
- |
- In some case, alternative/additional injectors or alternative fuel pump may be used
- Displayed data is result of HKS internal tests, please use for guidance purposes only.
|
|
| GT- 2835 PRO S (ER34 RB25 DET) |
| TURBO SPECIFICATION |
| Model |
Included Control Device |
Rated Power for 1 Unit (PS) |
| GT2835ProS |
HKS Upraed Actuator |
420 |
| Compressor Wheel |
| Trim |
Inlet Diameter (mm) |
Outer Diameter (mm) |
| 56 |
53.1 |
71.1 |
| Compressor Housing |
| Trim |
Inlet Diameter (mm) |
Outer Diameter (mm) |
| 100 |
50 |
0.50 |
| Turbine Wheel |
| Trim |
Outer Diameter(mm) |
Outlet Diameter(mm) |
| 84 |
56.5 |
51.8 |
| Exhaust Housing |
| Inlet Flange |
Outlet Flange |
A/R |
| T3 |
GT-Pro Specific |
0.68 |
|
|
| Specification of tested model |
| Cam |
Intake |
Exhaust |
Intercooler |
Fuel Control |
Other |
| - |
- |
HKS Muffler and Front Pipe |
S-TYPE |
F-con V Pro |
- |
- In some case, alternative/additional injectors or alternative fuel pump may be used
- Displayed data is result of HKS internal tests, please use for guidance purposes only.
|
| View Turbo Kit Actuator application charts |
|
|
 |
|
